Search Inventory    Search Products & Site

Double tap to zoom

 

Features

Performance Features
  • Below Deck Structure of strong-backs and gearbox stand allows for a smooth top deck which sheds water and debris.
  • Continuously welded Side Bands tied together through the integrated gearbox stand.
  • Replaceable Full Length 1/4-Inch Skids run one-half the length of the deck to protect side bands and add strength that resists bending.
  • Floating Hitch for unlevel terrain
  • 5-Year Gearbox Limited Warranty
  • Powder Coat Paint
  • Durable Tailwheel Beam

 

Construction Features
  • EZ Clean Sloped 10-Gauge Decks —eliminate trash build up and water traps.
  • Bush Hog® Gearboxes has splined output shafts with tapered roller bearings resist thrust and side loads as the pan pushes the cutter up or to the side of large obstacles like rocks or stumps.
  • Powder Coat Paint in colors that match today’s tractors is baked on to resist rust and nicks through years of rugged work.
  • Tail Wheel Beam has 3/16-inch wall and is clamped between two heavy steel plates for a secure fit to resist side loads during turns. Dual tail wheels available on BH27.
  • 5-Year Gearbox Limited Warranty comes with each new BH20 Series Cutter.
  • 1/4-inch continuously welded sidebands formed of 1/4-inch thick steel and 12 1/2-inches deep for large volumes of material.
  • 130 HP Bush Hog® Gearbox


Product Features

Adjustable Slip Clutches are standard equipment.

Solid Deck Reinforcements. Decks are reinforced with internal 7-gauge steel strongbacks that run the full length of the deck, tying together the entire structure with the gearbox stand. Bush Hog® blade pans are round to allow the mower to float over field obstructions.

Quick Detach Gearbox Shield

Floating Hitch for unlevel terrain

Specifications

Model BH25
Cutting Width 5ft.
Cutting Capacity 3 inch diameter
Cutting Height 1 1/2 to 10 1/2 inches
Dimensions (transport width x length) 5ft. 6 inches x 8ft 8 inches
Type Hitch 3 Point Cat. I, Cat. II Standard & QH
Deck Thickness 10 gauge
Sidebands 1/4x 12 1/2 inches
Driveshaft ASAE Category 4
Gearbox 130 HP
Tractor PTO Speed 540 RPM
Driveline Protection Slip Clutch Standard
Blade Holder(s) Round
Blades 1/2 x 4 inch uplift
Blade Tip Speed 14,600 FPM
Tires Single Laminated
Minimum Tractor HP 35 PTO
Safety Shielding Front and Rear Deflectors or Front and Rear Chains
Approximate Weight 906 lbs