Features 300CX Loader available from Robstown Hardware Co., TX

ManufacturerJohn Deere
Model 300CX on 3000 TWENTY Tractors
Specifications  
Model 3120/3320/3520/3720
Front tire 7.00-14 6PR R1
Rear tire 11.2-24 6PR R1
Front axle configuration ---
Wheelbase 68-in. (1727 mm)
Pump capacity, gpm 8.6
Rated pressure, psi 2500
Leveling configuration ---
Bucket used ---
Bucket weight, lb (kg) 206.8 (93.8)
Lift capacity at full height, lb (kg) ---
Measured at pivot (U) 1598 (725)
Measured at 500 mm ahead of pivot (V) 1122 (509)
Measured at 800 mm ahead of pivot (V) ---
Lift capacity at 59 in. (1500 mm), lb (kg) ---
Measured at pivot (W) 2125 (964)
Measured at 500 mm ahead of pivot (X) 1649 (748)
Measured at 800 mm ahead of pivot (X) ---
Boom breakout force, lbf (kgf) ---
Measured at pivot (Y) 3327 (1509)
Measured at 500 mm ahead of pivot (Z) 2417 (1097)
Measured at 800 mm ahead of pivot (Z) ---
Bucket rollback force capacity, lbf (kgf) ---
At maximum height (VV) 1787 (811)
At 59-in. (1500-mm) lift height (XX) 2974 (1349)
At ground-level line (ZZ) 3087 (1401)
Dimensions ---
Maximum lift height, in. (mm) (A) 102 (2593)
Clearance ---
At full height - bucket level, in. (mm) (B) 94 (2388)
At full height - bucket dumped, in. (mm) (C) 79.7 (2024)
Overall length (I+F), ft (m) 10.52 (3.207)
Overall height in carry position, ft (m) (J) ---
Digging depth, in. (mm) (H) 5.6 (143)
Reach ---
At max. height, in. (mm) (D) 22.1 (562)
At ground level - bucket level, in. (mm) (F) 58.6 (1489)
Bucket angle ---
Dump angle, degrees (E) 41.1
Rollback angle, degrees (G) 31
Dump angle, ground ---
Cycle times ---
Loader raise, seconds 3.56
Loader lower, seconds 2.1
Bucket dump, seconds 2.96
Bucket rollback, seconds 1.75