5085E for sale at Robstown Hardware Co., TX. Serving your new and used equipment needs from Robstown, TX.


View Other Models:

  • Get a Quote

    Fields with asterisks* are required.

    Please email our helpful staff with any questions or comments using the contact form.

  • Send to A Friend

    Fields with asterisks* are required.

    Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • John Deere PowerTech™ Diesel Engine with FT4 emissions compliance
  • Cab or open operator station available
  • Standard 12F/12R PowrReverser™ Transmission and MFWD
  • 540/540 Economy PTO
Manufacturer John Deere
Model 5085E (2016)
Official Test  
Nebraska Test number  Not available at this time  
Manufacturer  John Deere PowerTech 4045  
Engine family  FJDXL04.5305  
Aspiration  Turbocharged  
Cylinders/Displacement, cu. in. (L)  4 / 4.5 L 
   4 / 276 cu in. 
Cylinder Liners  Wet sleeved  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  Open: 114 ; Cab: 114 L 
   Open: 25 ; Cab: 30 U.S. gal. 
Optional  ---  
Underhood muffler  Yes  
Advertised PTO hp (kW) @ Rated rpm  52.2 @ 2400 per SAE kW 
   70 @ 2400 per SAE hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  62.5 @ 2400 per ISO 97/68/EC kW 
   85 @ 2400 per ISO 97/68/EC hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  18% @ 1900 RPM (80% rated speed)  
   27.9% @ 1600 RPM (peak torque)  
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Std. Transmission; Forward/Reverse  12F/12R PowrReverser  
Opt. Transmission; Forward/Reverse  24F/12R PowrReverser  
Reverser  Yes  
On-the-Go Shifting (Yes/No/Partial)  Partial  
Clutch; Wet/Dry  Wet  
Creeper  Not available  
Power Take-Off (PTO)  
Standard  540/540E  
Optional  540/1000  
PTO Speeds @ Engine rpm  540 @ 2400; 540E @ 1716; 1000 @2400 rpm 
PTO Actuation  Electrohydraulic  
Type  Open center  
Pump Rated Output, GPM (L/min.)  ---  
Standard  85.1 L/min 
   22.5 gpm 
Optional  ---  
Rated Flow @ One SCV, GPM (L/min.)  60.1 L/min 
   15.9 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  20.1 (for a single SCV) kW 
   26.9 (for a single SCV) hp 
Hitch Draft Control Load Sense Type  Mechanical  
Remote Control Valves Available  Rear SCV - Less, Dual Standard, or Triple Deluxe; Mid SCV - Less, Dual Standard, or Triple Standard (field installed)  
Hitch Category (SAE Designation)  Category 2  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  1457 kg 
   3213 lb 
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Top link  
Joystick SCV control  Optional  
Final Drive  
Type  Inboard planetary  
Differential controls  Mechanical (pedal)  
Availability  ---  
Front  No  
Front & Rear  No  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flanged  
Brakes, Type and Control  Hydraulic wet disc  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  Foldable, 2-post  
Platform - Flat/Straddle  Straddle  
Gearshift Location - Console/Floor  Floor  
Cab  ---  
Doors  1; left-hand door standard, right-hand door optional  
Platform - Flat/Straddle  Flat  
dB(A) Rating  78 dBA 
Seat Suspension System  Mechanical (standard)  
   Air (optional)  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  2350 mm 
   92.5 in. 
Front Tread Range, in. (mm)  1340 - 1904 mm 
   52.8 - 75.0 in. 
Front Axle Clearance, in. (mm)  386 mm 
   15.2 in. 
Turning Radius w/Brakes, ft (m)  3.54 m 
   11.6 ft 
Turning Radius w/o Brakes, ft (m)  4.36 m 
   14.3 ft 
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  3300; 3700 kg 
   7275; 8150 lb 
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  11.2-24 R1 Bias  
Rear  16.9-30 R1 Bias  
4WD  ---  
Track widths  ---  
Country of Manufacture  Augusta, GA (USA)  
Ballasting Restrictions, lb (kg)  5,325 for loader work; 4400 for field work kg 
   11,725 for loader work; 9700 for field work lb 
   Max ballast for field work is limited to 4400 kg  
   5325 kg max ballast applies to H260 loader only  
*Notes  Updated 4/8/2013