3025E for sale at Robstown Hardware Co., TX. Serving your new and used equipment needs from Robstown, TX.

3025E

View Other Models:

  • Get a Quote

    Fields with asterisks* are required.

    Please email our helpful staff with any questions or comments using the contact form.

  • Send to A Friend

    Fields with asterisks* are required.

    Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Standard four-wheel drive (4WD) for maximum traction
  • Tightest turning radius in its horsepower class
  • Hydro transmission with Twin Touch™ pedals for ease of use
  • Horizontal exhaust and folding ROPS
Manufacturer John Deere
Model 3025E (2017)
Engine  
Family  EYDXL1.64NDA  
   FYDXL1.64NDA  
   GYDXL1.64NDA  
Manufacturer  Yanmar  
Engine model  3TNV88F-EPJT1  
Engine power (gross)  18.4 kW 
   24.7 hp 
Power take-off (PTO) power  13 kW 
   17.4 hp 
Rated engine speed  2400 rpm 
Type  ---  
Injection pump type  High pressure common rail direct injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.64 L 
   3 / 100.2 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  88 x 90 mm 
   3.46 x 3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  69.6 Nm 
   51.3 lb-ft 
Fuel tank capacity  23.5 L 
   6.2 U.S. gal. 
Electrical  
Battery size  500 CCA 
Alternator (12-V)  75 amp 
Starter size  1.4 kW 
   1.9 hp 
Fuel system  
Type  High pressure common rail direct injection  
Fuel consumption  ---  
*Fuel consumption rate should be used for comparison purposes only  ---  
Transmission  
Standard transmission; forward/reverse  Hydrostatic transmission (HST)  
Optional transmission; forward/reverse  ---  
Left-hand reverser  ---  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  798 kg 
   1760 lb 
Rear  1197 kg 
   2640 lb 
Creeper  No  
Cruise control  Optional  
Differential lock  Yes  
Drawbar maximum vertical load    
Hydraulics  
Type  Open center  
Pump rated output  35.2 L/min 
   9.3 gpm 
Steering  15 L/min 
   4 gpm 
Implement  20.2 L/min 
   5.3 gpm 
Pump type  Dual gear  
Maximum operating pressure  172.4 bar 
   2500 psi 
Draft control sensing  Position control  
Remote control valves available  Up to two (optional)  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  615.1 kg 
   1356 lb 
Power take-off (PTO)  
Standard  540 rpm at 2500 rpm 
Optional  ---  
Control  Independent  
Clutch  Independent  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
Fluid capacities  
Crankcase with filter  4.5 L 
   4.8 qt 
Transmission and hydraulic system  ---  
Final drive  
Type  Bull Gear  
Differential lock  ---  
Operator station  
Rollover protective structure  ASABE S478  
Type  Foldable  
Platform - flat/straddle  Semi-flat  
Gear shift location - console/floor  Left-hand side  
Cab  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Dimensions  
Wheelbase  152.4 cm 
   60 in. 
Front axle clearance  33 cm 
   13 in. 
Turning radius with brakes  2.8 m 
   9.2 ft 
Turning radius without brakes  ---  
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  1007.9 kg 
   2222 lb 
Tires  
Front  Farm - 7-14  
   Turf - 27x8.5-15  
   R4 - 25x8.5-14  
Rear  Farm - 11.2-24  
   Turf - 41x14-20  
   R4 - 15-19.5  
Front tread range  ---  
Rear tread spacing  ---  
Miscellaneous  
Toolbox  ---  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---