John Deere Model 9400T


HORSEPOWER: (Gross engine power) 360 (268 kW) 425 (316 kW)
     Rated speed 2,100 rpm 2,100 rpm
     Type 6-cylinder, in-line, wet-sleeve, valve-in-head 6-cylinder, in-line, wet-sleeve, valve-in-head
     Aspiration Turbocharged and aftercooled Turbocharged and aftercooled
     Displacement 12.5 L (765 cu. in.) 12.5 L (765 cu. in.)
     Bore and stroke 5x6.5 in. (127x165 mm) 5x6.5 in. (127x165 mm)
     Compression ratio 16.5 to 1 16 to 1
FUEL SYSTEM (Injection type) In-line pump, electronic governor In-line pump, electronic governor
     Tank capacity 300 U.S. gal., 225 Imp. gal. (1026 L) 300 U.S. gal., 225 Imp. gal. (1026 L)
ELECTRICAL SYSTEM (alternator/cold cranking amps) 140 amps/1,850 cca (three 12-volt batteries) 140 amps/1,850 cca (three 12-volt batteries)
REAR AXLE Outboard planetary Outboard planetary
     Tread spacing 106 in. (2692 mm) 106 in. (2692 mm)
     Track length 111 (2819 mm) 111 (2819 mm)
     Track widths available, standard/optional 30-in. (762 mm)/36-in.(914 mm) 30-in. (762 mm)/36-in.(914 mm)
Ground contact area:    
     30-inch track width 6,660 sq. in. (4.27 m2) 6,660 sq. in (4.27 m2)
     36-inch track width 7,992 sq. in. (5.16 m2) 7,992 sq. in. (5.16 m2)
STATIC Ground PRESSURE:    
     30-in. track @ 40,000 lb. / @ 50,000 lb. 6 psi / 7.5 psi 6 psi / 7.5 psi
     36-in. track @ 40,000 lb. / @ 50,000 lb. 5 psi / 6.3 psi 5 psi / 6.3 psi
     Independent PTO (Optional) 13/4 in. (44.5 mm), 1,000 rpm 13/4 in. (44.5 mm), 1,000 rpm
     Horsepower measured at PTO 302 (225 kW) 302 (225 kW)
STEERING Electrohydraulic differential Speed sensitive with power boost (1.8 turns lock to lock) Speed sensitive with power boost (1.8 turns lock to lock)
HYDRAULIC SYSTEM Pressure flow compensated Pressure flow compensated
     Remote valves (optional) 3 (4th factory installed, 5th field installed) 3 (4th factory installed, 5th field installed)
     Flow available at one remote coupler 35 U.S. gpm, 29 Imp. gpm, (2.2 L/s) 35 U.S. gpm, 29 Imp. gpm, (2.2 L/s)
     Max. flow at two remote couplers (factory observed) 44 U.S. gpm, 36.7 Imp. gpm, (2.8 L/s) 44 U.S. gpm, 36.7 Imp. gpm, (2.8 L/s)
     Hydraulic (total capacity) 27 U.S. gal. (102 L) 27 U.S. gal. (102 L)
     3-POINT HITCH with Quick-Coupler (optional) Category 3; Category 4/4N optional Category 3; Category 4/4N optional
     Lift capacity, Category 3 [Category 4/4N] 13, 871 lb. (6292 kg) [14,445 lb. (6552 kg)] 13, 871 lb. (6292 kg) [14,445 lb. (6552 kg)]
TRANSMISSION (standard) 24-speed PowrSync transmission 24-speed PowrSync transmission
     Wide-swing drawbar support option 28-in. (711 mm) pin swing from center 28-in. (711 mm) pin swing from center
     Base shipping weight 37,000 lb. (16,780 kg) 37,000 lb. (16,780 kg)
     Maximum operating weight 50,000 lb. (22,676 kg) 50,000 lb. (22,676 kg)
BRAKES Power hydraulic wet disk Power hydraulic wet disk
CAPACITIES    
     Cooling system 63 U.S. qt. (60 L) 63 U.S. qt. (60 L)
     Crankcase w/ filter 44 U.S. qt. (42 L) 44 U.S. qt. (42 L)
     24-speed manual transmission without PTO 17 U.S. gal. (64 L) 17 U.S. gal. (64 L)
     24-speed manual transmission with PTO 17.5 U.S. gal. (69 L) 17.5 U.S. gal. (69 L)
     Axle/Axle with PTO 44 U.S. gal (166 L) / 44.5 U.S. gal. (167) 44 U.S. gal (166 L) / 44.5 U.S. gal. (167)

Copyright© 2000 Deere & Company
Back