John Deere Model 9400
Specifications and design subject to change without notice.
 |
||
 |
||
 |
||
| Gross engine horsepower | 360 (268 kW) | 425 (316 kW) |
 |
||
|
||
| Rated speed | 2,100 rpm | 2,100 rpm |
| Type | In-line, 6-cylinder, wet-sleeve, valve in head |
In-line, 6-cylinder, wet-sleeve, valve in head |
| Aspiration | Turbocharged and air-to-air aftercooled |
Turbocharged and air-to-air aftercooled |
| Displacement | 765 cu. in. (12.5 L) |
765 cu. in. (12.5 L) |
| Bore and stroke | 5 x 6.50 in. (127 x 165 mm) |
5 x 6.50 in. (127 x 165 mm) |
| Compression ratio | 16 to 1 | 16 to 1 |
| Lubrication | Full-pressure, full-flow filtration with bypass |
Full-pressure, full-flow filtration with bypass |
| Cooling system | Gear-driven centrifugal pump, with recovery tank |
Gear-driven centrifugal pump, with recovery tank |
| Replaceable valve-seat inserts |
Inlet and exhaust | Inlet and exhaust |
 |
||
|
||
| Type | Unit injection system with electronic governor |
Unit injection system with electronic governor |
| Filter | Spin-on primary filter with water-separator bowl |
Spin-on primary filter with water-separator bowl |
 |
||
 |
||
|
||
| 12-speed Syncro | Standard | Standard |
| 24-speed PowrSyncTM | Optional | Optional |
| 12-speed Power Shift | Optional | Optional |
 |
||
|
||
| Alternator, amps | 140 amps | 140 amps |
| Number of batteries | 3 | 3 |
| Total cold cranking amps |
2,775 |
2,775 |
 |
Inboard planetary | Inboard planetary |
|
||
| Axle length: | ||
| Standard | 120 x 3.94 in. (3045 mm x 100 mm) |
120 x 4.33 in. (3045 mm x 110 mm) |
| Optional | 120 x 4.33 in. (3045 mm x 110 mm) |
|
| Tread adjustment | Rack bar/adjusting-pinion gear tool optional |
Rack bar/adjusting-pinion gear tool optional |
| Differential lock (optional) |
Electrohydraulic | Electrohydraulic |
|
||
 |
||
|
||
| Type | Pressure/flow compensated |
Pressure/flow compensated |
| Selective control valves | 3 standard (4th and 5th optional) |
3 standard (4th and 5th optional) |
| Main pump | Axial piston, gear-driven |
Axial piston, gear-driven |
| Maximum pressure | 2,900 psi (20 000 kPa) |
2,900 psi (20 000 kPa) |
| Flow available at one SCV |
35 U.S. gpm (2.2 L/sec) |
35 U.S. gpm (2.2 L/sec) |
| Maximum flow available at two SCVs (factory observed) |
44 U.S. gpm (2.8 L/sec) |
44 U.S. gpm (2.8 L/sec) |
 |
||
|
||
| Standard/optional | Optional | Optional |
| Category | Cat. 3; Cat. 4/4N optional |
Cat. 3; Cat. 4/4N optional |
| Sensing | Electrohydraulic | Electrohydraulic |
| Hitch lift capacity: Cat. 3 Cat. 4/4N |
13,871 lb. (6292 kg) 14,445 lb. (6552 kg) |
13,871 lb. (6292 kg) 14,445 lb. (6552 kg) |
 |
||
|
||
| Type | Independent | Independent |
| 1 3/4-in. shaft, 1,000 rpm @ 1,895 engine rpm |
Optional | Optional |
| PTO horsepower (factory estimate) |
302 (225 kW) | 302 (225 kW) |
|
||
 |
||
|
||
| Type | Articulated hydrostatic with two double-action rams |
Articulated hydrostatic with two double-action rams |
| Turn angle | 42 deg. | 42 deg. |
 |
||
|
||
| Type | Power, hydraulic wet-disk |
Power, hydraulic wet-disk |
 |
||
|
||
| Fuel tank | 270 U.S. gal. (1026 L) |
270 U.S. gal. (1026 L) |
| Maximum usable | 256 U.S. gal. (973 L) |
256 U.S. gal. (973 L) |
| Cooling system | 72 U.S. qt. (68.1 L) |
72 U.S. qt. (68.1 L) |
| Crankcase w/ filter | 38 U.S. qt. (36 L) |
38 U.S. qt. (36 L) |
| 12- and 24-speed manual transmission w/PTO | 34.5 U.S. gal. (130.6 L) |
34.5 U.S. gal. (130.6 L) |
| 12-speed Power Shift transmission w/PTO | 14 U.S. gal. (53 L) |
14 U.S. gal. (53 L) |
| 12-speed Power Shift (axles separate) |
27 U.S. gal. (102.2 L) |
27 U.S. gal. (102.2 L) |
| Hydraulic system with 3-point hitch |
21 U.S. gal. (79.5 L) |
21 U.S. gal. (79.5 L) |
| Hydraulic system without 3-point hitch | 20 U.S. gal. (75.7 L) |
20 U.S. gal. (75.7 L) |
 |
||
|
||
| Average shipping | 31,440 lb. (14 261 kg) |
33,770 lb. (15 318 kg) |
Copyright© 2000 Deere & Company